Call To Order
PRAG PV40-200-V-C-S 200V DC Surge Protective Device + 2 Pole Enclosure
NGN56,444.00
Availability:
In stock
Out of stock
Weight
2 kg
Product Description
-
Overview
PV40-200-V-C-S 200V DC Surge Protective Device
Type 2 surge arrester designed for low voltage DC system against surges at the boundaries from lightning protection zone 0B-2and higher.- In accordance with EN50539, IEC61643-11 and UL1449-4th
- DC SPD for common mode protection
- Pluggable module design, easy replacement
- High discharge current 40kA 8/20
- Reliable supervision due to disconnection device;
- Fault indication by red indication flag in window;
- With remote alarm terminal optional;
- In accordance with: EN50539;IEC61643-11:2011; UL1449-4th
- Category IEC/VDE: II/ C
- Protection Mode: Common mode
- Nominal voltage (Vdc) Un: 200
- Max. continuous operating voltage (Vdc) Ucpv: 250
- Nominal discharge current(8/20us) In: 20kA
- Max. discharge current(8/20us) Imax : 40kA
- Voltage protection rating Up: <1.0kV
- Voltage protection rating VPR: <0.7kV
- Short-circuit current rating(Iscpv): 1000A
- Response time: ≤25 ns
- Follow current: No
- Backup fuse(only required if not already provided in : 125A gR/gPV
- Operating temperature range: – 40ºC ~ + 80ºC
- Cross-section of connection wire: Single-strand 35mm2; multi-strand 25mm2
- Mounting: 35mm DIN-rail in accordance with EN 50022/DIN46277-3
- Enclosure material: thermoplastic; extinguishing degree UL94 V-0
- Degree of protection: IP20
- Installation width: 2 modules, DIN 43880
- Thermal disconnector: Internal green – normal ; red – failure
- Remote alarm contact: Optional
- Approvals, Certifications: CE
- Remote alarm contact type: Isolated Form C
- Switching capability Un/In: AC: 250V/0.5A DC: 250V/0.1A; 125V/0.2A; 75V/0.5A
- Max. Size of connecting wire: Max. 1.5mm2(or # 16AWG)