Call To Order
MERCURY 650VA UPS (ZI)
NGN53,805.38
Availability:
In stock
Out of stock
Weight
6 kg
Product Description
|
Specification
Input voltage | 220VAC |
Input frequency | 50Hz |
Input phase | Single phase |
Input socket | With Fuse |
Cold Start (0 to 100% load) | Press the ON/OFF switch |
Input range (220V) | 140V-300V |
Rating output (VA). | 650VA |
Rating output (W). | 390W |
Rating output (W). | Battery mode(simulated sine wave), AC mode (sine wave) |
Power factor | 0.6 |
Rating voltage | 220V |
Output range | 220Vac-7%+15% ( in battary mode ) |
Rear Output Socket | 2xUniversal – Battery backup |
Transfer time | TYPICAL 4-8 ms |
Communication Interface | NIL |
Rating frequency | 50Hz |
Output Frequency Line-mode | Synchronize with the Utility |
Battery mode | 50 Hz±1Hz |
Output Frequency Line Mode | Synchronize with the utility |
Short Circuit Protection Line Mode | FUSE & firmware protection |
Battery Mode | Software protection controlled by firmware |
Overload Protection Line Mode | 110%+-5% (Go to fault mode after 5 minutes), 120%+-5% (Go to fault mode immediately) |
Battery Mode | 110%+-5% (Shutdown after 5 minutes) 120%+-5% (Shut down immediately) |
Rating frequency | 12V/8.2AH x 1 |
Backup Tim – Typical | 10mins to 18mins (depending on load) |
Charge Current | About 1A at normal mode |
Over Charge Protection | >14.5V +/- 0.2V stop charging <13.5V +/- 0.5V Recharge |
Weight | 5.6kg +/- 0.3Kg |
Dimension | 390x 145 x 220 (mm) |